And 65 other trace minerals
For best results UltraGrowth Soil Conditioner should be used with UltraGrowth Plant or Tree Food.
Application Instructions
Indoor / outdoor potted plants:Sprinkle 1 tablespoon on soil surface per pot, mix into soil and water thoroughly. GardensSprinkle 2 tablespoons per sq. foot on soil surface when growth is visible and LawnsAdd UltraGrowth Granular in a drop fertilizer machine on lowest setting and spread on grass, water thoroughly after application. TransplantingTrees, shrubs and plants -- Sprinkle 2 tablespoons per sq. foot in hole prior to transplanting, then treat the area with 4 litres or 1 gallon
of diluted (1 ml per litre or 5 ml per gallon) Ultra GrowthTree or Plant Food. Soak all treated areas with water after application.Mature Trees - 5 meters (15 feet) or taller.Make 6 to 8 vertical drainage holes (15 cm or 6 inches in diameter and 45 cm or 18 inches deep) using a posthole digger or auger. Space the holes evenly around the base of the tree at the drip line. Fill half of a drainage hole with cleaned rock (gravel). Add 1 cup (250 ml.) of UltraGrowth Soil Conditioner, on top of the gravel in the hole. Fill the remainder of the hole with the cleaned rock (gravel). Once all vertical drains are filled, pour an equal amount of UltraGrowth Tree Food (liquid), 500 ml. total concentrate per tree (divided equally per hole), into the vertical drainage holes. Water each hole until the hole is saturated. Repeat saturating all the vertical drains in 1 hour. Repeat watering through growing season and once frost is out of the ground in the spring. Subsequent applications of UltraGrowth, solid or liquid can be done directly into each vertical drain.
| |
|||||
![]() Join the UltraGrowth ForumSend Page To a FriendFind the Answers to Your Questions About UltraGrowth
|
|
|||||
| ||||||